This page provides instructions to upgrade your mangOH Red locally with the latest Octave firmware. Alternatively you can upgrade your device over the air if your device has been set up to communicate with Octave.
- If you are a Windows user, you must install the driver on your computer the first time by running: WP7702 driver for Windows. Mac and Linux users do not require a driver installation.
Note for Mac Users
For Mac, USB driver support for Octave edge devices is only supported up to MacOS 10.14. USB driver support in MacOS 10.15+ for Octave edge devices is currently unavailable. If you're using MacOS 10.15 or higher, you must use a Linux or Windows machine (e.g., via a virtual machine) to update your Octave edge device.
Connect your laptop to the mangOH red via the USB port.
Open a terminal or a Windows command tool. Test the connection issuing ping command (press Ctrl-C to interrupt):
> ping 192.168.2.2 PING 192.168.2.2 (192.168.2.2) 56(84) bytes of data. 64 bytes from 192.168.2.2: icmp_seq=1 ttl=64 time=2.22 ms 64 bytes from 192.168.2.2: icmp_seq=2 ttl=64 time=2.16 ms 64 bytes from 192.168.2.2: icmp_seq=3 ttl=64 time=1.19 ms 64 bytes from 192.168.2.2: icmp_seq=4 ttl=64 time=2.24 ms ^C --- 192.168.2.2 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 1.191/1.956/2.249/0.444 ms
You will now be able to ssh and copy files into the mangOH Red.
Download the latest stable release: 3.0.0 for mangOH red.
- Copy the firmware to the mangOH:
scp mangOH-3.0.0.wp77xx.spk [email protected]:/tmp/mangOH-3.0.0.wp77xx.spk
- ssh into the mangOH:
- Install the package:
fwupdate download /tmp/mangOH-3.0.0.wp77xx.spk
The mangOH will reboot after installing the new firmware.
Updated 26 days ago